Witam. Proszę o podpowiedź jak mogę podkręcić AMD Sempron 2800+. Z góry dzięki za pomoc.
CPU–Z version 1.32.
Code Name Palermo
Specification AMD Sempron(tm) Processor 2800+
Family / Model / Stepping F C 2
Extended Family / Model F 2C
Brand ID 38
Package Socket 754
Core Stepping DH–E6
Technology 90 nm
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE, SSE2, SSE3, x86–64
CPU Clock Speed 1607.8 MHz
Clock multiplier x 8.0
Front Side Bus Frequency 201.0 MHz
L1 Data Cache 64 KBytes, 2–way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2–way set associative, 64 Bytes line size
L2 Cache 256 KBytes, 16–way set associative, 64 Bytes line size
L2 Speed 1607.8 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 128 bits

Mainboard and chipset
Motherboard manufacturer ASUSTeK Computer INC.
Motherboard model K8N, Rev 1.xx
BIOS vendor American Megatrends Inc.
BIOS revision 1009
BIOS release date 09/06/2005
Chipset nVidia nForce3 250 rev. A1
Southbridge nVidia nForce3 MCP rev. A2
Sensor chip ITE IT8712
Graphic Interface AGP
AGP Status enabled, rev. 2.0
AGP Data Transfer Rate 4x
AGP Max Rate 4x
AGP Side Band Addressing not supported, not enabled

Memory
DRAM Type DDR–SDRAM
DRAM Size 768 MBytes
DRAM Frequency 201.0 MHz
FSB:DRAM CPU/8
CAS# Latency 3.0 clocks
RAS# to CAS# 4 clocks
RAS# Precharge 4 clocks
Cycle Time (TRAS) 8 clocks
Bank Cycle Time (TRC) 12 clocks
DRAM Idle Timer 16 clocks
# of memory modules 2
Module 0 DDR–SDRAM PC3200 – 512 MBytes
Module 1 DDR–SDRAM PC3200 – 256 MBytes

Software
Windows version Microsoft Windows XP Professional Dodatek Service Pack 2 (Build 2600)
DirectX version 9.0c